Hard to Machine.
Not Allowed to Fail.

Specialty-alloy parts for high-risk, long-duty service — marine engines, offshore downhole tools, aerospace. 30+ years, 40+ processes, all in-house.

MOQ 1 pieceQuote in 24 hOne piece to batch, same line
◷ NDA welcome — send it with your RFQ.
Five-axis high-speed milling of an integral impeller — the cutter engaged in a blade channel
Specialty-alloy precision machining · Since 1993Built for conditions where failure is not an option
30+Years of accumulation
40+Machining processes in-house
7Classification societies certified
100,000+Part types machined over 30+ years
Quality — verified in house

Every critical dimension verified. Every part shipped with its data.

Every critical dimension is verified on Hexagon CMMs — the larger machine takes parts up to 1,200 × 4,000 × 1,000 mm. Every heat of material is verified in-house before it reaches a machine — chemistry by spectrometer, mechanical properties by tensile and impact testing. Every part we ship carries its dimensional inspection report and material certificate, traceable to the heat number. A recent marine delivery shipped with a 59-page inspection package: material tracking, dimensional records, NDT and pressure-test reports.

The four checks every shipped part goes through

CMM-Verified Dimensions
01

CMM-Verified Dimensions

2× Hexagon GLOBAL S CMMs: travel to 1,200 × 4,000 × 1,000 mm — large enough to measure the parts we machine. 100% dimensional reports with every order.

In-House Material Verification
02

In-House Material Verification

SPECTRO spectrometer reads 50+ elements (incl. C/P/S/N); tensile & impact testing in-house: no third-party lab dependency

NDT to 13 Meters
03

NDT to 13 Meters

Ultrasonic + dye penetrant; UT range 0–13,000 mm covers our largest shafts and drill collars.

Full Traceability
04

Full Traceability

Heat-number traceability and material certificates as standard; FAI packages on request.

What we do

The Parts That Must Not Fail Are What We Do.

We machine safety-critical parts to customer drawings — components for marine engines, offshore downhole tools, and aerospace applications, mostly in specialty alloys. Three requirements converge in this work: the part must not fail in the service conditions it is built for, the material is difficult to cut, and the process window is narrow, built from accumulated production data rather than manuals. This has been our line of work for over thirty years.

Long shafts staged on blue supports in a clean assembly bay
Industries we serve

Proven Where Failure Costs Most.

Why Zhongnan

Three Things Set Zhongnan Apart.

We build our own machines

We build our own machines

When both the technology and the machines were closed to us, we built our own — a 6-meter five-face gantry machining center, a 12-meter floor-type boring machine, an 8-meter CNC lathe, a 7-axis gun drill, all running on our floor today. The machines were never the product. The machining is.

Read more
Nothing leaves our floor

Nothing leaves our floor

Machining, deep-hole drilling, grinding, EDM, coating, plating, inspection — every process in-house. One quality system to audit, one traceability chain, and your drawings never leave the building.

Read more
Accumulation, not cleverness

Accumulation, not cleverness

“In precision machining, cleverness matters little. Accumulation matters most.” — Our founder, 30+ years on the R&D front line. The team behind our hardest program has a shortest tenure of 12 years.

Read more
Flagship proof

Ten Meters. 1,050 Bar.
Two Years to First in China.

In 2003, a leading Chinese shipyard licensed a European marine engine maker's electronically controlled common-rail diesel technology. They had the drawings — yet for two years, no one in China could make the fuel common-rail unit: over ten meters long, holding back 1,050 bar, at the heart of the world's most advanced marine engines.

The machining technology and the machines themselves were both out of reach. So we rebuilt the machines, redesigned the tools, and figured it out: key breakthroughs in six months; part, process, and equipment fully mastered in three years.

In 2006, Zhongnan delivered China's first domestically made common-rail units for large marine diesel engines, ending the reliance on imports — certified by seven classification societies (ABS, BV, CCS, DNV, LR, NK, RINA) — and later went on to power China's polar research vessel on Antarctic expeditions. And the capability never retired: large marine common-rail pipes (40CrNiMoA) remain in batch production on our floor today.

Ten-metre marine common-rail pipe on V-blocks, machined end fittings in place
Marine common-rail10 m · 1,050 barChina's first, delivered 2006
Capabilities

From Raw Material to Finished Surface.

Difficult materials are our routineInconel 718 · Incoloy 925 · High-nitrogen non-magnetic stainless (P550 · 15-15 class) · Titanium TC4/TC11/TC18All materials
IP & compliance

Confidential by Structure,
Not by Promise.

Most machine shops promise not to leak your drawings. We removed the possibility — every process is in-house, so there is no third party to leak them to. A publicly listed company chose us for exactly this reason.

In-house production floor: machine rows along the aisle, operators at their stations

FAQ

Q: What parts does Zhongnan Machinery make?

Safety-critical parts to customer drawings — components for marine engines, offshore downhole tools and aerospace applications, mostly in specialty alloys. 100,000+ part types machined since 1993.

Q: What tolerances and surface finishes can you hold?

0.005 mm on precision features and Ra 0.1 μm on ground surfaces. 5-axis work runs to φ800 mm class; five-face gantry to 6,000 mm, floor-type boring to 12,000 mm.

Q: How large a part can you machine?

Turning to Ø800 × 8,000 mm, with a plant-wide workpiece envelope of Ø1,000 × 10,000 mm. Deep-hole work runs on a 12,000 mm machine envelope, 10,000 mm production-proven.

Q: How fast will I hear back on a drawing?

Within 24 hours an engineer reviews it and replies with a feasibility assessment, process recommendations and potential manufacturing risks. We do not provide instant quotes.

See all questions we get asked →

Get a quote

Send Us the Part That Must Not Fail.

Upload your drawing — NDA welcome, yours or ours. Within 24 hours, an engineer will review it and reply with a feasibility assessment, process recommendations, and potential manufacturing risks.

We do not provide instant quotes. Each quotation is calculated from your drawing, material, and quantity, then confirmed with you step by step — to ensure quotation accuracy.

Exhaust valve body — cast body, threaded ports and seal bores
MarineExhaust valveCast body, machined face — threaded ports and seal bores